This is how the cupboard looked when I first saw it in the back of an antique shop. The owner wanted me to restore the piece. It had several coats of paint on it. The feet had half rotted off, the crown molding was missing as were the doors, and the cupboard had been sawed into. The ends were originally one board. To strip it took 40 hours, three gallons of stripper, and three gallons of Acetone. When I had it stripped down to bare wood I realized that some time in the past that it had been refinished with a belt sander. The original wood surface with patina was Gone. Had I known this I would have taken it to someone that had a stripping tank. This is only the second antique that I have ever had to sand out because of the course belt sanding marks left on it.
The mate to this cupboard can be found on page 188 Fig. 232 in the book “Art and Mystery of Tennessee Furniture”. That one was made out of walnut and is dated to 1790 – 1820. This one is made out of cherry but they were both made in the same shop.
I used old lumber to restore this with. I restored the bracket foot base, made new doors, and crown molding. The total time to restore this piece was 138 hours.
Whether it's a precious antique needing restoration, a consultation as to the authenticity of a period piece, or the preservation of an architectural detail of your home or historic building or other restorative enterprise, you can utilize my services as a Master Cabinet Maker.